Engineering, Jacobs School of

[ courses ]

7310 Engineering Building Unit 1, Warren Mall
http://www.jacobsschool.ucsd.edu

All courses, faculty listings, and curricular and degree requirements described herein are subject to change or deletion without notice. Updates to curricular sections may be found on the Academic Senate website: http://senate.ucsd.edu/Curriculum/Updates.htm.

The Irwin and Joan Jacobs School of Engineering at UC San Diego comprises the Departments of Bioengineering (BE), Computer Science and Engineering (CSE), Electrical and Computer Engineering (ECE), Mechanical and Aerospace Engineering (MAE), NanoEngineering (NE), and Structural Engineering (SE). The Jacobs School is directed by the dean of engineering. The departments offer eighteen undergraduate programs that fall into three categories: impacted, premajor, and open major programs as well as many graduate degree programs. For a complete list of engineering undergraduate and graduate programs, please visit our website at http://www.jacobsschool.ucsd.edu. Students interested in engineering should consult the website and the individual department listings that follow this section of the catalog.

UC San Diego’s six undergraduate colleges differ in their general-education requirements. Prospective students should review the general-education requirements and take them into account when planning their college curriculum.

Acceptance to Departmental Majors in the Jacobs School of Engineering

Student demand exceeds program capacity in some of the undergraduate majors. Owing to limited departmental resources, major programs to which more students apply than can be accepted have been declared impacted majors. Acceptance into an impacted engineering major is based on academic excellence demonstrated in high school or at a community college. Acceptance will be granted to the maximum number of students in each of these impacted major programs consistent with maintaining acceptable program quality and in compliance with admissions procedures and criteria approved by the Academic Senate’s Educational Policy Committee.

Please note: The departments in the Jacobs School of Engineering have requested that all engineering majors be declared impacted. This request is currently under review. Please check the department websites for information on the status of this request, including effective dates. Remember that admission to the university and to a college does not guarantee acceptance to an impacted major.

Freshmen

Freshmen are admitted to engineering majors in one of three ways: open majors, premajors and impacted majors.

Open Majors

The following majors are open to all admitted UC San Diego students: bioengineering: bioinformatics (offered through the BENG department), biosystems, chemical engineering (offered through the NanoEngineering department), computer science: bioinformatics (offered through the CSE department), electrical engineering, electrical engineering and society, engineering sciences (offered through the SE department), environmental engineering, nanoengineering and structural engineering. All applicants who have been accepted to UC San Diego and indicated a premajor or open engineering major on their application are placed directly into that major.

Premajor Programs

There is one engineering premajor program offered: (1) engineering physics. Incoming freshmen who identify this premajor as their first choice on their UC San Diego admissions application are accepted directly into the premajor upon admission to UC San Diego. Subsequent acceptance to the major is dependent on performance in selected mathematics, science, and engineering screening courses as well as competitive grade point average in the premajor screening courses.

Premajor engineering students are expected to apply for acceptance to the major during the spring quarter of their freshman year. Acceptance to the major is based on the grade point average in the screening courses only. The grade point average required for acceptance to the major by premajors is set individually by each engineering program. Premajors should consult their departments concerning the appropriate screening courses and the current grade point average standards for acceptance. In addition to the courses required by the departments, it is expected that all premajor students will take twelve to eighteen units of general-education college requirements during their first year.

Premajor engineering students who are not able to apply before the end of their third quarter, or who wish to reapply following an unsuccessful application, must contact their department as soon as possible for further advising as acceptance to any engineering major that has a premajor will not be considered after six quarters of enrollment.

Impacted Majors

The following engineering majors are impacted: aerospace engineering, bioengineering, bioengineering: biotechnology, computer engineering, computer science, and mechanical engineering. Applicants must indicate one of these impacted majors as their first choice on their UC application in order to be considered for acceptance to the major by the UC San Diego Office of Admissions.

Effective fall 2001, this selection is based on the freshman review criteria (Comprehensive Review) administered by the UC San Diego Office of Admissions and Relations with Schools.

It is strongly suggested that all students accepted into engineering programs consult their department’s academic adviser at an early stage to plan their lower-division engineering courses, and that they consult with a college academic counselor to arrange general-education courses around the required screening courses. Students admitted fall quarter should attend the engineering department’s orientation meetings during Welcome Week.

Bioinformatics Programs

Students interested in applying to either the bioengineering: bioinformatics major (offered by the Department of Bioengineering), or the computer science major with a specialization in bioinformatics (offered by the Department of Computer Science and Engineering) should consult individual department listings that follow this section of the catalog.

Transfers

Following California’s Master Plan for Higher Education, UC San Diego gives high priority to students transferring from California community colleges.

Transfer students are admitted to engineering majors in one of three ways: open majors, premajors, and impacted majors. For major-specific advising, please contact the relevant departmental undergraduate academic advising office.

Effective fall 2009, these courses are strongly recommended for all engineering transfer students for success in their major.

*Refer to the UC San Diego General Catalog to select major prerequisite recommendations for computer language courses.

Open Majors

The following majors are open to all admitted UC San Diego transfer students: aerospace engineering (offered through MAE through spring 2011), bioengineering: bioinformatics (offered through the BENG department), biosystems, chemical engineering (offered through NanoEngineering), computer engineering (offered through CSE), computer engineering (offered through ECE), computer science, electrical engineering, electrical engineering and society, engineering science (offered through MAE), engineering sciences (offered through SE), environmental engineering, mechanical engineering (offered through MAE through spring 2011), nanoengineering and structural engineering.

Please note: Effective fall 2015, the following majors will be declared impacted for transfer admissions: computer engineering (offered through the CSE and ECE departments), computer science (BS), and computer science (BA). If you will be applying to these majors for admission as a transfer student in fall 2015, please be sure to read the information below regarding transfer admissions into an impacted major.

Premajor Programs

There is one engineering premajor program offered: (1) engineering physics. Subsequent acceptance to the major is dependent on performance in selected mathematics, science, and engineering screening courses as well as competitive grade point average in the premajor screening courses.

Premajor transfer engineering students are expected to apply for acceptance to the major during their third quarter of their first year at UC San Diego. Acceptance to the major is based on the grade point average in the screening courses only. The grade point average required for acceptance to the major by premajors is set individually by each engineering program. Premajors should consult their departments concerning the appropriate screening courses and the current grade point average standards for acceptance. In addition to the courses required by the departments, it is expected that all premajor students will take twelve to eighteen units of general-education college requirements during their first year.

Premajor transfer engineering students must apply to the major before the end of their third quarter as acceptance to any engineering major that has a premajor by a transfer student will not be considered after the end the of third quarter of enrollment.

Impacted Majors

Since acceptance to impacted engineering majors is quite competitive for freshman and transfer applicants alike, academic standards are high.

Transfer students who choose impacted engineering major programs (bioengineering, bioengineering: biotechnology, aerospace, and mechanical) as their first-choice major on their UC application are strongly encouraged to complete the major preparation classes listed previously.

Acceptance to impacted majors may be limited to the best transfer applicants, e.g., those who have been admitted to UC San Diego with the most complete lower-division preparation and the highest college grade point averages. Since acceptance is restricted to these majors, transfer students are encouraged to apply to more than one major degree program and to include one open major in their selection.

It is strongly suggested that all students accepted into engineering programs consult their department’s academic adviser at an early stage to plan their lower-division engineering courses, and that they consult with a college academic counselor to arrange general-education courses around the required screening courses. Students admitted fall quarter should attend the engineering department’s orientation meetings during Welcome Week.

For specific program requirements for transfer students, please refer to the appropriate department’s listing that follow this section of the catalog.

Bioinformatics Programs

Students interested in applying to either the bioengineering: bioinformatics major (offered by the Department of Bioengineering), or the computer science major with a specialization in bioinformatics (offered by the Department of Computer Science and Engineering) should consult individual department listings that follow this section of the catalog.

Continuing UC San Diego Students

Continuing UC San Diego undergraduate students who wish to change into impacted majors must submit an application to the department on or before the target dates and must meet minimum requirements. Interested students should make an appointment to speak with the departmental undergraduate adviser for more details.

Double Majors and Minors

It is the policy of the UC San Diego Academic Senate not to approve double majors within engineering. Students who qualify for admission to graduate school and who have the extra time are encouraged to consider coterminal bachelor’s/master’s degrees in one or two engineering disciplines.

For more information visit http://www.jacobsschool.ucsd.edu/academic/academic_undergrad/bs-ms.shtml.

Orientation to Engineering

ENG 1, 2, 3: This course series has no prerequisites and students will be given an introduction to the engineering profession and our undergraduate program. Exercises and practicums will develop the problem-solving skills needed to succeed in engineering. It is offered fall, winter, and spring.

Integrative Engineering Education

IDEA Student Center: The IDEA Student Center facilitates and encourages the professional, academic, and personal success of engineering students. The services available through the IDEA Student Center are designed to assist students as they pursue their chosen degrees and to prepare them for life outside of the university as engineering professionals and responsible citizens. The staff serve as a resource for those interested in applying to engineering majors; getting involved in student organizations; seeking internships; accessing tutoring, scholarship, and involvement information; or for those needing a referral to on-campus and community resources. In addition, support is provided to the Teams in Engineering Service (TIES) Program, Team Internship Program, and the California State Summer School for Mathematics and Science (COSMOS). For more information, visit the office in Jacobs Hall, Room 1400, e-mail the staff at idea@soe.ucsd.edu, or visit http://www.jacobsschool.ucsd.edu/student/.

Global TIES—Teams in Engineering Service): Global TIES is an innovative program in humanitarian engineering that gives students the opportunity to apply their skills in a real-world setting. Interdisciplinary teams of students collaborate on student-directed but faculty-advised projects designing engineering and technology solutions for nonprofit, nongovernmental organizations, and the communities they serve. Projects take place in the greater San Diego area and in developing countries around the world. For details, visit http://ties.ucsd.edu.

Team Internship Program (TIP): Under the direction of the Corporate Affiliates Program, this corporate-sponsored program gives students the opportunity to develop their engineering skills in a multidisciplinary team environment that provides real-world engineering experience in preparation for entering the workforce. In these full-time, competitive summer paid internships, students work on-site with industry partners as a systems-oriented solution team focused on a clearly defined and significant project. For details, visit http://www.jacobsschool.ucsd.edu/TIP.

The California State Summer School for Mathematics and Science (COSMOS) is a four-week residential pre-college academic enrichment experience in math, science, technology, and engineering for talented high school students. Students participate in one of the following eight academic courses (or clusters): 1. Computers in Everyday Life; 2. Engineering Design and Control of Kinetic Sculptures; 3. Living Oceans and Global Climate Change; 4. When Disaster Strikes: Earthquake Engineering; 5. From Lasers to LCDs: Light at Work; 6. Biodiesel from Renewable Sources; 7.Bioengineering/Mechanical Engineering: The Amazing Red Blood Cell; and 8. Tissue Engineering and Regenerative Medicine. Typically, one-third of admitted students are awarded financial assistance. For more information, visit http://www.jacobsschool.ucsd.edu/cosmos.

Bernard and Sophia Gordon Engineering Leadership Center: The mission of the Gordon Center is to train effective engineering leaders who create new products and jobs that benefit society. The Gordon Center offers an engineering leadership and awards program for undergraduate, graduate, and professional students with leadership potential. The Gordon Scholars participate in a comprehensive engineering leadership training program, which includes leadership workshops and forums, and summer programs that integrate theory and case studies with hands-on practice and mentoring. For details, visit http://www.jacobsschool.ucsd.edu/GordonCenter/.